Avital Tornado 2 Installationshandbuch PDF herunterladen (Seite 3)

Required Installation Tools

Voltmeter

Wire Strippers

Electric Drill & Bits

Phillips Screw Driver

Convoluted Tubing *

Solder Gun *

Wire Crimpers

Shrink Tube or Electrical Tape

* Op tional

Important Information

1.Test all circuits with a voltmeter.

2. Make all wiring connections with butt connectors. DO NOT twist wires

or use "scotch-lok" connectors.

3. Route RED, RED/WHITE and BLACK wires from the control unit

directly to the battery.

4. Keep extensions as short as possible. Use same gauge wires for short

extensions and larger gauge wires for longer extensions.

5. Before installing, discuss the placement of the LED indicator and valet

switch with the vehicle owner. DO NOT disconnect the battery cables.

6. Make all connections by removing the lug from the cable clamp

without detaching clamp.

7. Turn off dome light or remove dome light fuse to prevent battery drain.

This de vice com plies with Part 15 of the FCC rules. Any changes or

modi fi ca tions made to the sys tem with out the ex press ap proval of

Avi tal Tech nolo gies, Inc. could void the user's author ity to op er ate this

equip ment.

Tornado

Installation Manual 1/5/98

1 2 3 4 5 6 7 8 ... 14 15

Keine Kommentare

Avital Tornado 2 Installationshandbuch Seite 3