7
©
2001 Directed Electronics, Inc.
Starter Kill, press for one second. The parking lights will flash
twice and the red LED will go out. If pressing the first time did
not unlock all vehicle doors, press again within 10 seconds to
unlock the remaining passenger doors and the parking lights will
flash twice. Pressing a third time within 10 seconds will flash
the parking lights and honk the horn twice, confirming that the
doors are unlocked and the starter kill is disarmed. After 10
seconds, the system can be unlocked/disarmed again, as usual.
NOTE: If the system has been locked/armed with the remote, you must
use the remote to unlock/disarm the system. Manually unlocking the
vehicle does not disarm the starter kill; it will only unlock the doors.
If your remote transmitter is lost or damaged, you can manually
disarm your the Failsafe Starter Kill. To disarm the starter kill
without a transmitter, you must have the vehicle's ignition key and
know where the Valet switch is located. Be sure to check with your
installer at the time of installation for the location of the Valet
switch.
To disarm the starter kill, turn
the ignition key on and press
the Valet switch within 15
seconds. The starter kill should
now disarm. If it does not
disarm, you may have waited
too long; turn the ignition off
and repeat the process.
Kommentare zu diesen Handbüchern